Toilet Flushes Slow

Slow Toliet

Common Problem in Corpus Christi Is The Slow Flush Of  Toilet

If you have a slow flushing toilet in your bathroom in Corpus Christi Texas, then you’re probably wondering what’s going on. You’re not alone! In fact, this is one of those problems that could perplex even the most seasoned DIY household plumbers. In fact, many Corpus Christi plumbers tell us this is one of the most desperate calls they receive.

As usual with this kind of plumbing, understanding how things are supposed to work will help you diagnose and fix issues. For a toilet to work properly, it needs an adequate amount of siphoning pressure.When the bowl empties, that means the water has all siphoned out after the initial gush, which is provided by the flood from the tank after you lower the level. If your toilet is flushing slow, then you may have a problem with the flood waters.

Now that you know what to look for, it’s time to take note on what you see going on in your slow toilet. These fixes can also apply to a toilet not flushing completely.

Flushing Toilet, What’s the Problem

Your toilet didn’t always seem so slow. You have tried drain cleaners and are almost certain there is a problem with the toilet. You might be thinking that you need a new one.

If Your Toilet has a Problem

Before you replace your toilet or do unnecessary toilet repairs, you can do a simple test to verify that the problem is your toilet and not an obstruction in the sewer line. Fill a one-gallon bucket with water and pour it directly in the middle of the toilet bowl. Then flush the toilet while observing the flow rate and sound. You should get a gurgling sound or suction sound when it flushes.If the water quickly gets flushed down the drain and makes the characteristic gurgling sound, your drains are flowing good.

However, if the water is sluggish to empty the bowl and starts to back up, then your problem is more likely a clog or obstruction in the drain. Another problem is when the water is sluggish and swirls around and around in the bowl when you flush it with no backup. In this case, there could be a problem with the water getting from the tank to the bowl. See more here.

Although toilets are sturdy and reliable components of the plumbing system, because they are in constant use, toilet problems will almost always eventually occur.

Slow Toilet Flush Leaves HomeownerStymied

One of the more obvious reasons for a slow flushing toilet is some kind of object or obstruction in the toilet bowl. Use a plunger to dislodge anything that may be clogging the passageway of the bowl. Sometimes you really have to work at it to remove difficult objects. Push the plunger forcefully down and then quickly pull it back. If this doesn’t work, try a toilet auger. If there is something such as a toothbrush or comb lodged in the bowl passageway, and you can’t dislodge it in this manner, the toilet will have to be lifted from the floor.

When you have the toilet lifted to examine the underside, check in the drain line under the toilet for the object that may be lodged. The drain under a toilet is usually 3 to 4 inches in diameter and requires a large “electrically” powered snake. This typically needs to be done by a professional.

The culprit could also be the airflow. There is a vent stack, which allows air to come in to allow the toilet to flush. If this gets clogged the toilet will not flush properly. Read more here.

Some solutions to common toilet problems are replacing the flapper when the problem is phantom flushes and unclogging holes underneath the rim of the bowl if the problem is the bowl emptying slowly or weak flushing.

Remedy for a Slow-Flushing Toilet

You don’t have to be particularly systematic when troubleshooting sluggish flushing; you can try the easier remedies first.

 Tip
  • If the toilet is still sluggish after completing these procedures, something may be stuck in the toilet’s P-trap that you can’t remove with an auger, such as a plastic or metal toy. You’ll probably have to pull the toilet to remove it.
  • If you have trees growing around the house and you’ve noticed the sluggish flushing getting steadily worse over an extended period, roots may have grown into the sewers. In most cases, you will need professional help to remove these. Read the full article here.

Diagnosing and fixing the toilet flush still not working?

If neither of the above approaches seems to work, you may indeed have a bigger issue causing your slow flushing toilet. Be safe. If fixing the issue is something that is risky or not being understood, contact an Expert or a Professional Plumber. Call us today: (361) 991-1002 or visit our website http://www.royalplbg.com